Effect of build orientation on the trueness of occlusal splints fabricated by three-dimensional printing.

PURPOSE: Scientific evidence pertaining to the evaluation of trueness of occlusal splints fabricated using different three-dimensional (3D) printers and build orientations compared to subtractive technologies is lacking. METHODS: Overall, one hundred and ten occlusal splints were manufactured using two different 3D printers and a dental mill. Five groups of ten were fabricated using the 3D printers at different build orientations (0, 30, 45, 60, and 90 degrees). In addition, a comparison group of ten occlusal splints was subtractively manufactured using a five-axis dental mill. All occlusal splints were scanned and exported as a standard tessellation language file. Analysis was conducted with metrology software with root mean square estimate average positive deviation and average negative deviation used as the measured outcome. RESULTS: The 0 degree printing orientation was the most accurate for printer one with the root mean square value of 0.05 ± 0.01 mm, and 60 degree printing orientation was most accurate for printer two with the RMS value of 0.11 ± 0.01 mm. Subtractively manufactured occlusal splint had significantly higher trueness with the lowest RMS value of 0.03 ± 0.05 mm. CONCLUSION: Build orientations influence the trueness of additively manufactured occlusal splints while occlusal splints produced by subtractive manufacturing were statistically significantly more accurate.

Impact of Removable Partial Dentures on Masticatory Performance in Partial Edentulism: A Systematic Review.

PURPOSE: Removable partial dentures (RPDs) are widely used in clinical dental practice as a cost-effective treatment to restore the oral function. Clear understanding of the effect of partial dentures on masticatory performance is important for clinical decision making in prosthodontics. The purpose of this systematic review is to evaluate the impact of RPDs on masticatory performance (MP) of partially edentulous subjects. MATERIAL AND METHODS: Electronic database and hand searches were conducted to explore clinical trials reporting the evidence of the effect of metal and acrylic based removable partial dentures on mastication. The validated objective and subjective measures of assessment of mastication were included. The article selection, data extraction and assessment of risk of bias were conducted by two reviewers independently. RESULTS: Out of 11200 studies, one randomised control trial and 23 clinical trials met the inclusion criteria. Positive impact on different parameters of masticatory function after RPD treatment, was reported in 14 studies. Subjective evaluation of chewing ability (CA) displayed an improvement in 83.3% of studies, while improvement was evidenced only in 69.5% of studies upon objective evaluation. Majority of the studies were reporting data on free end saddles. Out of the 13 studies associated with bilateral free end saddle dentures, 9 studies showed a positive effect on masticatory efficiency. Various factors were found to have an impact on the masticatory performance (MP) of RPDs. Conclusion Subjective evaluation displays higher positive impact of RPDs in MP than objective evaluation. Assessment of patients' perspectives is important in clinical decision making. Multiple factors affect the MP with RPD treatment.

Trueness assessment of additively manufactured maxillary complete denture bases produced at different orientations.

STATEMENT OF PROBLEM: The trueness of the intaglio surface of an additively manufactured maxillary denture base may be influenced by the build orientation and the inclusion of support struts. PURPOSE: The purpose of this in vitro study was to compare the trueness of a photopolymer additively manufactured maxillary complete denture base created at different orientations with different support strut designs. Optimizing the build is critical for adopting best practice when fabricating maxillary complete dentures through additive manufacturing techniques. MATERIAL AND METHODS: Denture bases (N=70) were additively manufactured at 5 different build orientations (0-, 15-, 45-, 60-, and 90-degrees) with 10 specimens per orientation. Another 2 groups of 10 were manufactured by using the optimal printing orientation with and without support struts. The denture bases were scanned after storage in artificial saliva at 37 °C, and the scan data were analyzed with a 3D metrology software program. Statistical differences were determined with 1-way analysis of variance (ANOVA) and the Kruskal-Wallis test (α=.05). Color deviation heat maps were used to determine areas of clinically significant dimensional errors. RESULTS: Significant differences were found among groups for positive mean deviation (F=44.09, P<.001), negative mean deviation (F=11.69, P<.001), and root mean square deviation (F=17.11, P<.001) for the different orientations. One-way ANOVA revealed significant differences with the use of support struts in relation to negative mean deviation (F=3.857, P<.001) and RMSE (F=11.215, P<.001) and positive mean deviation (Kruskal-Wallis H=0.070, P=.007). The color deviation maps showed that a 45- to 90-degree print orientation was truest overall and that the addition of support struts to the cameo and intaglio surfaces improved the trueness of the maxillary denture bases. CONCLUSIONS: The build orientation and inclusion of support struts influenced the accuracy of the intaglio surface of additively manufactured maxillary denture bases. A 45- to 90-degree build orientation with support struts on the cameo and intaglio surfaces resulted in the truest denture base.

Survival of Single-Unit Porcelain-Fused-to-Metal (PFM) and Metal Crowns Placed by Students at an Australian University Dental Clinic over a Five-Year Period.

The aim of this retrospective study was to determine the survival rate of single-unit porcelain-fused-to-metal (PFM) and metal crowns placed by dental students at an Australian university undergraduate dental clinic over a five-year period. Complications and the incidences of crown failures were recorded. Clinical records pertaining to single-unit PFM and metal crowns inserted over a five-year period were reviewed, including patient-related, tooth-related, and procedural factors for each crown. Crowns were evaluated as surviving, surviving with complications, or failed. Kaplan-Meier statistical analysis was used to estimate survival rate., This study is based on a sample of 232 (78.4%) PFM crowns and 64 (21.6%) metal crowns inserted between 2014 and 2018. Cumulatively, 224 (75.7%) were surviving, 48 (16.2%) were surviving but previously had complications, and 24 (8.1%) failed. The 5-year cumulative survival rate of all PFM and metal crowns was 83.9% (0.839 ± 0.038, Kaplan-Meier). The average survival time for all crowns was 4.432 ± 0.089 years. Comparatively, PFM crowns had a higher survival rate at 1 year (0.972 ± 0.010) and 2 years (0.919 ± 0.017), compared to metal crowns at 1 year (0.964 ± 0.011) and 2 years (0.894± 0.018). The survival rate of metal crowns remained constant from 2 years to 4 years and thereafter, whereas there was a continued decline in the survival rate of PFM crowns to 83.2% (0.832 ± 0.038) at 4 years and thereafter. Crowns placed on premolars had the highest cumulative survival rate whereas those placed on molars exhibited the lowest survival rate for the duration of the study period. Despite single-unit PFM crowns having a higher 1- and 2-year survival rate compared to metal crowns, metal crowns had a higher survival rate at 4 years and thereafter. Survival rates are comparable to previous studies.

Perceptions of oral health education and practice among nursing students in Malaysia and Australia.

OBJECTIVE: Representing the largest proportion of healthcare workers, nurses play a significant role in oral health (OH) maintenance as part of a larger effort to promote holistic patient care. The study aims to determine nursing students' perceptions of OH education and practice in Malaysian and Australian nursing schools. MATERIALS AND METHODS: A self-administered questionnaire (content- and face-validated) survey was undertaken, classroom style, amongst final-year nursing students from selected Malaysian (n = 122, Response rate=97.6%) and Australian (n = 299, Response rate=54.7%) institutions. Quantitative data were analysed via Statistical Package for Social Science software (Chi-square and Fisher's exact tests, p ≤ 0.01). RESULTS: Significantly more Malaysian nursing students, compared to those in Australia, reported having encountered patients with OH issues (98.4% vs. 82.9%), namely halitosis (87.7% vs. 62.2%), oral ulcers (63.1% vs. 41.1%), oral/dental trauma (36.9% vs. 21.1%) and caries in children (28.7% vs. 7.7%). Less than half of Malaysian and Australian nursing students reported that they received adequate OH training (48.4% vs. 36.6%, p ≤ 0.01), especially in detecting oral cancer (18.0.0% vs. 22.6%, p ≤ 0.01) and preventing oral diseases (46.7% vs. 41.7%, p ≤ 0.01). Students in both countries demonstrated positive attitudes and believed in their role in OH care. Most students agreed that they should receive training in OH, especially in smoking cessation and providing OH care for patients with special needs. They also opined that a standardized evidence-based oral hygiene protocol is needed. CONCLUSION: Support for education and practice in this area of patient care suggested positive implications for further development of nurses' roles in OH promotion and management.

Oral health education in the undergraduate nursing curriculum of Australian and Malaysian institutions.

INTRODUCTION: A high degree of training is necessary to prepare student nurses for their roles as oral healthcare partners that can promote a holistic approach to health in the community. This study aims to determine the extent of oral health education in Australian and Malaysian nursing institutions, as well as investigate educators' perceptions of education and practice in this area of care. METHODOLOGY: An audio-recorded, semi-structured qualitative phone interview was conducted with the heads of 42 nursing schools across Australia (n = 35) and Malaysia (n = 7) during the 2015 academic year. Qualitative data were analysed via thematic analysis. Quantitative data, wherever appropriate, were measured for frequencies. RESULTS: The response rate was 34.2% (n = 12) and 71.4% (n = 5) for the Australian and Malaysian subjects, respectively. Findings revealed that although all the nursing schools measured provided didactic and clinical training in oral health, curriculum content, expected learning outcomes, amount of clinical exposure and assessment approach lacked consistency. Most nursing educators across both countries perceived an overloaded curriculum as a barrier to providing oral health education. Whilst educators demonstrated their support for training in this area of care, they expressed the need for an established national guideline that highlights the educational requirement for future nurses in oral health maintenance and their scope of practice. CONCLUSION: This study provides valuable information for further developing oral health education for nurses, to improve their competency and ultimately the health of the communities that they will serve.

Pre-Outplacement Perceptions of Dental Students Regarding Rural Oral Health Practice and Associated Factors.

Rural outplacement programs have been offered by Australian universities to encourage dental students to consider rural careers. The dental curricula should be designed to provide graduates with a good understanding of oral health issues that rural oral health care workers face. Pre-outplacement perceptions of dental students on rural practice are considered imperative to review and update the outplacement programs; however, they have not been investigated in detail. An online, anonymous, voluntary survey was conducted among the first-year dental students. The responses were solicited on the level of awareness and understanding of rural oral health, intention to practice in rural locations and factors informing the appeal of rural dental practice. The mean of a seven-point Likert scale revealed that most students had some level of perceived knowledge and awareness of rural communities and oral health. Students with rural affiliation were more likely to have the intent to practise rurally after graduation (p = 0.001). For short-term rural practice, students overall expressed positive intention. Greater job opportunities were the main motivating factor, while the distance from family and friends was the main deterring factor for practising rurally. Rural affiliation influences the intent to practise rurally on graduation. The pre-outplacement perceptions, in this study, are comparable with post-outplacement observations reported in the literature.

Final year dental students' self-assessed confidence in general dentistry.

BACKGROUND: Self-assessment is an important introspective skill that dental professionals will utilise throughout their professional career. Its value lies in its ability to help individuals identify areas of strengths and weakness, and subsequently seek further development of professional skills where needed. The aim of this study was to investigate the correlation between self-assessed confidence and the assessment grade of final year dental students based on the professional attributes and competencies of newly qualified dentists outlined by the Australian Dental Council (ADC). METHODS: Ethical approval was obtained prior to distribution of a questionnaire with 45 statements to final year dental students. The survey was created based on the learning outcomes of the ADC guidelines in the domains of "scientific and clinical knowledge" and "patient care." Participants indicated their level of self-assessed confidence by marking "X" on a visual analogue scale (VAS) from zero ("No Confidence") to 10 cm ("Very Confident"). The assessment grade was based on OSCE, viva voce, case report and written paper. RESULTS: A total of 58 (71.6%) dental students participated in the survey. The reported self-assessed confidence over two domains were under "patient care": clinical information gathering 8.92 ± 1.07 cm (range =3.94-10.0 cm: n = 58; 100%), clinical diagnosis and management planning 8.26 ± 1.34 cm (range =0.50-9.95 cm: n = 55; 94.8%), clinical treatment and evaluation, 6.07 ± 1.69 cm (range =0-10.00 cm: n = 55; 94.8%), and "scientific and clinical knowledge": 6.98 ± 1.58 cm (range =0-10.00 cm: n = 58; 100.0%). Within these categories, high confidence was reported for routine dental care (caries management and preventive care) whilst lower confidence was reported for the management of oral medicine and pathologies, dental emergencies, trauma, paediatric dentistry and prosthodontics. Correlation between the assessment grade and the overall score of self-assessed confidence is low positive (r = .225) and not statistically significant (n = 46; P = .132, Spearman'sρ). CONCLUSIONS: The final year dental students appear to have good overall self-assessed confidence in core areas of general dentistry. However, confidence seems to be over-estimated when compared with summative assessment.

Oral Health Education for Medical Students: Malaysian and Australian Students' Perceptions of Educational Experience and Needs.

Education in oral health is important to prepare future medical professionals for collaborative roles in maintaining patients' oral health, an important component of general health and well-being. The aims of this study were to determine the perceptions of medical students in Malaysia and Australia of the quality of their training in oral health care and their perceptions of their professional role in maintaining the oral health of their patients. A survey was administered in the classroom with final-year Malaysian (n=527; response rate=79.3%) and Australian (n=455; response rate: 60%) medical students at selected institutions in those countries. In the results, most of these medical students reported encountering patients with oral health conditions including ulcers, halitosis, and edentulism. A majority in both countries reported believing they should advise patients to obtain regular dental check-ups and eat a healthy diet, although they reported feeling less than comfortable in managing emergency dental cases. A high percentage reported they received a good education in smoking cessation but not in managing dental trauma, detecting cancerous lesions, or providing dietary advice in oral disease prevention. They expressed support for inclusion of oral health education in medical curricula. These students' experience with and perceptions of oral health care provide valuable information for medical curriculum development in these two countries as well as increasing understanding of this aspect of interprofessional education and practice now in development around the world.

A Community Engaged Dental Curriculum: A Rural Indigenous Outplacement Programme.

BACKGROUND: Indigenous people worldwide suffer from poor oral health as compared to non-Indigenous citizens. One of the approaches to bring about improvement in Indigenous oral health is to enhance the service provision by implementing oral health outplacement programmes. A case study of such a programme for dental students in Australia reports how an educational institution can successfully engage with an Indigenous oral health service to provide learning experiences to the students as well as deliver much needed services to the community. DESIGN AND METHODS: The assessment of this ongoing outplacement programme over the period of 2008-14, based on students' feedback, highlights some of the key beneficial outcomes. Students agreed that the Indigenous outplacement programme improved their understanding of Indigenous issues (mean ± SD: 4.10±0.8; 5 refers to strongly agree on 5-point scale) and increased the possibility that they will practise in Indigenous health (3.66±1.0). They were pleased with the assistance received by clinical supervisors and clinic staff at the Indigenous dental clinic (4.28±0.8). CONCLUSIONS: This programme has demonstrated that structured student outplacements are valuable in building relations across cultures especially with Indigenous communities. It has also shown that university engagement with the public health sector can be beneficial to both institutions. Significance for public healthAn oral health outreach programme is one of the suggested approaches to effectively address the endemic issues of poor oral health among Indigenous people around the world. An Indigenous dental clinical outplacement in Australia provides an example of beneficial outcomes of such an approach. It provides dental students with an opportunity to experience the health issues related to Australian Indigenous communities and prepare future graduates to work comfortably in the public health care system. Indigenous people also develop trust and feel comfortable in receiving oral health care services from non-indigenous clinicians.

Bisphosphonates, healthcare professionals and oral health.

OBJECTIVE: General medical and dental practitioner and pharmacists all encounter patients on bisphosphonates and as such require adequate knowledge regarding osteonecrosis of the jaw, a potential complication associated with its use. The cross-sectional study investigated perceived implications of and attitudes towards bisphosphonate use in oral health among general medical and dental practitioners and pharmacists. MATERIALS AND METHODS: Medical and dental practitioners and pharmacists registered in Victoria, Australia, completed an online survey (SurveyMonkey©). Data analysis consisted of chi-square tests with significance as p < 0.05. RESULTS: One hundred and thirty six doctors (general medical practitioners, GMPs), 283 dentists (GDPs) and 26 pharmacists (PHs) participated. 70, 38 and 80%, respectively, reviewed patients prescribed bisphosphonates (BPs). GMPs (88%), GDPs (76%) and PHs (85%) were aware of osteonecrosis of the jaws (ONJ). GMPs (76%) and PHs (100%) advised patients to inform dentists. GMPs (45%) referred patients for dental assessments prior to commencing BPs with 71.9% of GDPs received such referrals. In terms of available information on oral health and BPs, GMPs (56%), GDPs (50%) and PH (53.8%) were either unsure any existed or reported receiving sufficient information. CONCLUSIONS: Discrepancies exist amongst different healthcare professionals in terms of BP use and oral health, and common consensus guidelines are warranted.

Investigating oral health-related quality of life and self-perceived satisfaction with partial dentures.

AIM: To investigate the prevalence and severity of oral health-related quality of life in patients treated with removable partial dentures at a publicly-funded dental hospital. The association between patients' demographic profiles, denture-related, variables and oral health-related quality of life was also investigated. METHODS: A questionnaire was designed to investigate the use and satisfaction of removable partial dentures, and oral health-related quality of life of removable partial denture wearers using the Oral Health Impact Profile-14. The questionnaire was administered to 740 randomly-selected patients who received removable partial dentures during 2005-2008. The response rate was 31.35%. Non-parametric tests and a logistic regression model were used to analyze the association between denture-related variables and oral health-related quality of life. A question on symptoms unrelated to dentures was also analyzed. RESULTS: The Oral Health Impact Profile-14 prevalence calculated was 43.1%. The removable partial denture experience and frequency of use was inversely associated with Oral Health Impact Profile-14 scores. Metal-based removable partial dentures were associated with lower Oral Health Impact Profile prevalence and severity scores. No significant association was found between demographic profile, circumstance for provision of removable partial dentures and Oral Health Impact Profile-14 score. CONCLUSION: The participants of this study indicated that perceived denture performance, removable partial dentures material, experience, and frequency of use are associated with oral health-related quality of life.

Evaluating surface roughness of a polyamide denture base material in comparison with poly (methyl methacrylate).

Polyamide denture base materials are more flexible than the commonly used poly (methyl methacrylate) (PMMA). However polishability of polyamides has not been examined adequately. This study investigated the surface roughness (Ra) and clinical acceptability of samples of a polyamide denture base material and PMMA fabricated by injection moulding and traditional heat processing systems, respectively. Half of each sample surface was polished using the conventional technique (lathe with pumice followed by high shine buffs) and the other half was left unpolished. A profilometer was used to measure Ra along 3 tracks on each surface before and after polishing. Two-way ANOVA was used to compare the two surfaces of the two materials for variations in Ra values. Polyamide denture base material when polished with conventional laboratory technique became more than 7 times smoother whereas processed PMMA when polished became more than 20 times smoother using the same polishing technique. However the surface roughness of polyamide is well within the accepted norm of 0.2 µm Ra. Polyamide produces a clinically acceptable smoothness after conventional polishing by lathe.